- Regular price
- £265.99
Product Description
- Double fire door kit - guardsman pull handle, push plate and closer hardware pack is supplied as a door furniture set.
- Finished in Satin Stainless Steel
- These kits are suitable for use on both FD30 and FD60 fire rated doors.
- This internal fire door kit is supplied complete with:
- 2 x Guardsman Pull Handle 1370x25mm Satin Stainless Steel With 1200mm Centres Supplied With Bolt Through Fixings
- 2 x Push Plates (1250 x 75mm) Radiused Corners Counter Sunk Supplied With Fixing Screws
- 2 x EN2-4 Overhead Rack And Pinion Door Closer CE Marked Tested To Bs En 12209 With SSS Armset And Matching Cover Suitable for doors up to 80kg and 1100mm wide
- 12 x Grade 13 Heavy Duty Radiused Corners fire door hinges Tested BS EN 1935
- Supplied With Fixing Screws
- 12 x Intumescent Hinge pads
- Regular price
- £265.99
Fire Certification / Info
Fire Certification / Info
Fire Doors Certification
To confirm the door received is certified, look for a label or plug indicating certification. Additionally, check the instructions/certificate supplied with the product for information on its certification.
Certificate for made to measure fire doors are supplied separately immediately after your door is delivered.
Fire Doors Accessories
CE marking is mandatory for essential ironmongery items like locks, latches, closers, and hinges. To ensure compliance, these items must be firmly fixed with no missing screws and be compatible with the door leaf's certification.
Fire Door Frames / Seals
It is essential that the frame specification is appropriate for the fire rating of the door. Additionally, the selection of frame/lining/casing and intumescent/smoke seals should be compatible with each other.
Installation Guides
- It is crucial to avoid cutting glazing apertures on site, as doing so will render the certification invalid. Only a certificated licensed processor should carry out the cutting of apertures for glazing and air transfer grilles.
- The gap between the door and frame should be between 2-4 mm at the top and sides, and the threshold gap should follow the manufacturer's instructions (usually around 8-10 mm). Details of the recommended threshold gap will be included in the certificate
- It's crucial that anyone who installs a fire door is fully trained and capable of doing so.


Frequently Bought Together
-
Vendor: Hoppe
ARRONE Fire Door Kit E Office door locking
Regular price £127.99 -
Vendor: Elite Ironmongery
Ironmongery Fire Door Kit - Lever, Latch and Closer Hardware Pack
Regular price £87.99 -
Vendor: Elite Ironmongery
Ironmongery Fire Door Kit - Garage Lever, Lock, Escutcheons and Closer Hardware Pack
Regular price £62.99 -
Vendor: Elite Ironmongery
Satin Stainless Steel Size 2-4 Light/Med Duty Closer
Regular price £47.99