- Regular price
- £176.99
Product Description
- The double fire door ironmongery kit - lever, latch and Closer hardware pack (includes hinge pads and lock case intumescent pad)
- Available with four different stylish lever handles to suit
- These kits are suitable for use on both FD30 and FD60 fire rated doors.
- Finished in Satin Stainless Steel (Contact us for other finishes)
- Fire door kit is supplied complete with:
- 1x 19mm Dia SSS Handle Concealed fix sprung rose supplied with 8mm spindle and bolt through fixings BS EN 1906 grade 3 & Certifire Approved
- 6 x Grade 13 Heavy Duty Radiused Corners fire door hinges tested to BS EN1935
- 12x Intumescent hinge pads and 1x lock case jacket
- 1x Mortice Latch To Din 18251 55mm Backset CE Marked BS EN 122209 with SSS Radiused Forend and Strike Plate
- 2x Overhead Closer 2-4 CE Marked Tested to BS EN12209 with SSS Radiused Forend & Strike plate.
- 2x Heavy Duty Lever Action Flush Bolts Tested To BS EN 12051
- 1x SNP Easy Clean Floor Socket To Suit Flush Bolt.
- includes hinge pads and lock case intumescent pad (for FD60 you will need double the intumescent pads and lock case please contact us)
- Regular price
- £176.99
Fire Certification / Info
Fire Certification / Info
Fire Doors Certification
To confirm the door received is certified, look for a label or plug indicating certification. Additionally, check the instructions/certificate supplied with the product for information on its certification.
Certificate for made to measure fire doors are supplied separately immediately after your door is delivered.
Fire Doors Accessories
CE marking is mandatory for essential ironmongery items like locks, latches, closers, and hinges. To ensure compliance, these items must be firmly fixed with no missing screws and be compatible with the door leaf's certification.
Fire Door Frames / Seals
It is essential that the frame specification is appropriate for the fire rating of the door. Additionally, the selection of frame/lining/casing and intumescent/smoke seals should be compatible with each other.
Installation Guides
- It is crucial to avoid cutting glazing apertures on site, as doing so will render the certification invalid. Only a certificated licensed processor should carry out the cutting of apertures for glazing and air transfer grilles.
- The gap between the door and frame should be between 2-4 mm at the top and sides, and the threshold gap should follow the manufacturer's instructions (usually around 8-10 mm). Details of the recommended threshold gap will be included in the certificate
- It's crucial that anyone who installs a fire door is fully trained and capable of doing so.






Frequently Bought Together
-
Vendor: Hoppe
ARRONE Fire Door Kit E Office door locking
Regular price £127.99 -
Vendor: Elite Ironmongery
Ironmongery Fire Door Kit - Lever, Latch and Closer Hardware Pack
Regular price £87.99 -
Vendor: Elite Ironmongery
Ironmongery Fire Door Kit - Garage Lever, Lock, Escutcheons and Closer Hardware Pack
Regular price £62.99 -
Vendor: Elite Ironmongery
Satin Stainless Steel Size 2-4 Light/Med Duty Closer
Regular price £47.99